Burkert Type 8631 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro vodu Burkert Type 8631. Burkert Type 8631 User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 3
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Type 8631
Installation information - setting stroke limit
Montageinformation - Hubbegrenzung einstellen
Supplement 1001/00_EU-ML_00805804 / Original DE
Setting stroke limit - for actuator sizes 175 and 225 mm
in combination with electrical feedback indicator type 8631
Follow the instructions in the relevant operating instructions for the devices.
Procedure:
Loosen grub screw Pos. 1 and remove control head Pos. 2.
Using a flat-blade screwdriver, screw Pos. 3 and 4 out of the lower part Pos. 8.
Loosen lock nut Pos. 6.
Note!
If the gap between the spindle and lock nut is too large, the device may be destroyed when the dia-
phragm is changed!
The gap between the flat surfaces of the spindle and the lock nut may be maximum 24 mm.
Limit the maximum stroke by screwing in the spindle Pos. 5 using a wrench size 8 Allen key.
After setting the stroke, tighten the lock nut Pos. 6 and fasten the spindle Pos. 5.
Screw in upper part of the switch spindle Pos. 3 and 4.
Put on control head Pos. 2 and fasten in required position using grub screw Pos. 1 and set both limit switches
(e.g. Pos. 9).
3
4
5
8
1
9
2
6
7
24
Setting stroke limitFig. 1:
The operating instructions and data sheets for the particular device can be found on the Internet at:
www.burkert.com
Documentation
english
Zobrazit stránku 0
1 2 3

Shrnutí obsahu

Strany 1 - Type 8631

Type 8631Installation information - setting stroke limit Montageinformation - Hubbegrenzung einstellenSupplement 1001/00_EU-ML_00805804 / Original DES

Strany 2 - Hubbegrenzung einstellen

Type 8631Montageinformation - Hubbegrenzung einstellenSupplement 1001/00_EU-ML_00805804 / Original DEHubbegrenzung einstellen - für Antriebsgrößen 17

Strany 3

Type 8631Informations pour le montage - Régler la limitation de courseSupplement 1001/00_EU-ML_00805804 / Original DERégler la limitation de course -

Komentáře k této Příručce

Žádné komentáře